Elenco Bigshot Camera Bedienungsanleitung PDF herunterladen (Seite 8)

Pick up the PCB module and turn

the mode knob to the position

shown above.

Fasten the PCB module onto the

camera body using three screws.

Now set the mode knob to the OFF

position. It must remain in the OFF

position during the remaining

assembly process.

Build

C3.

Insert the PCB module into the camera

body. Make sure the pillars in the

camera body go through the holes in

the PCB module.

C4.

C5. C6.

Electronics

Learn about LCD

http://www.bigshotcamera.com/learn/lcd-display/index

Learn about electronic components

http://www.bigshotcamera.com/learn/electronics/index

Find the connector attached to the

pair of wires from the PCB that have

the same color combination as the

wires from the dynamo. Hold the two

connectors in each hand and gently

join them until they click.

C7.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Elenco Bigshot Camera Bedienungsanleitung Seite 8