Elenco 3 1/2 Digit Cap. / Trans. Kit Bedienungsanleitung PDF herunterladen (Seite 14)

-22-

r Solder the spring to the PC board as shown in

Figure Q.

r Install the bottom two 2.5 x 8mm screws to the

LCD housing as shown in Figure R.

r Peel off the protective backing on the top label

(A) and bottom label (B) and stick them to the top

case as shown in Figure S.

r Place the PC board into the bottom case. Feed

the battery clip through the case as shown in

Figure T.

r Place the four colored sleeves over the input

sockets as shown in Figure T. Note that the black

sleeve goes on the COM socket.

r Place the red power cap onto the switch SW1 as

shown in Figure T.

Figure R

2.5 x 8mm Screws

Figure S

Top Label (A)Bottom Label (B)

FINAL ASSEMBLY

PARTS LIST - SECTION F

SECTION F

Final Assembly

Qty. Description Part #

r 1 Button (red) 622027

r 3 Sleeve Input Socket (red) 622660

r 1 Sleeve Input Socket (black) 622661

r 1 Case Top 623112

r 1 Case Bottom 623203

r 1 Cover Battery 623210

r 2 Screw LCD Housing 2.5 x 8mm 642239

Qty. Description Part #

r 2 Screw Case 3 x 17.5mm 642240

r 1 Spring 680033

r 1 Label Bottom 723052

r 1 Shield Label 780012

r 1 Holster 9C72

r 1 Test Leads Alligator 9TL13

r 1 Test Leads Red-Black 9TL14

Note: The shield may be installed already.

Figure Q

Solder

Spring

-13-

PARTS LIST - SECTION B

RESISTORS

Qty. Symbol Description Color Code Part #

r 1 R23 .01Ω Shunt wire 100166

r 1 R22 0.99Ω 0.5% 1/4W black-white-white-silver-green 109950

r 1 R21 9Ω 0.5% 1/4W white-black-black-silver-green 119050

r 1 R20 90Ω 0.5% 1/4W white-black-black-gold-green 129050

r 1 R18 100Ω 0.5% 1/4W brown-black-black-black-green 131050

r 1 R32 390Ω 1% 1/4W orange-white-black-black-brown 133930

r 1 R31 900Ω 1% 1/4W white-black-black-black-brown 139030

r 2 R17, R19 900Ω 0.5% 1/4W white-black-black-black-green 139050

r 1 R33 5.6kΩ 5% 1/4W green-blue-red-gold 145600

r 1 R16 9kΩ 0.5% 1/4W white-black-black-brown-green 149050

r 1 R30 13kΩ 1% 1/4W brown-orange-black-red-brown 151330

r 1 R15 90kΩ 0.5% 1/4W white-black-black-red-green 159050

r 1 R14 900kΩ 0.5% 1/4W white-black-black-orange-green 169050

r 4 R10-R13 2.25MΩ 0.5% 1/4W red-red-green-yellow-green 172250

r 1 VR1 200Ω (201) Pot (lay down) 191320

Note: Resistor tolerance (last band) of 5-band resistors may be blue instead of green.

SEMICONDUCTORS

Qty. Symbol Value Description Part #

r 2 D1, D2 1N4001 Diode 314001

r 1 T2 2SA9013 Transistor 329013

MISCELLANEOUS

Qty. Symbol Description Part #

r 1 Fuse 200mA 250V 5 x 20mm 530020

r 2 Screw 2.5 x 8mm 642239

r 2 Fuse Clips 663004

r 4 Input Socket (20A, μA/mA, COM, VΩCAP) 664066

SECTION B

DC Voltage & Current Circuit

Pot (lay down)

PARTS IDENTIFICATION

Fuse Fuse Clip

Input Socket

Shunt Wire

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Elenco 3 1/2 Digit Cap. / Trans. Kit Bedienungsanleitung Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messgeräte Elenco 3 1/2 Digit Cap. / Trans. Kit